Design service

Cable Recess Standard

Free

Lump sum not applicable

A 10 cm wide and 4 cm high cable passage is placed in the middle of an existing or additional rear wall. It offers sufficient space for several cables, all common plugs fit through without any problems. If you want another place, contact us please.

Cable Recess Special

5 EUR

per recess

You need a special cable cutout and want to determine the size yourself? No problem, we can drill practically any kind of additional hole at practically any location in the vertical and/or horizontal of your furniture - for example, to run a cable across the entire width of a shelf.

5 EUR

per board

Depending on your individual requirements, we leave in the vertical and/or horizontal plane of your furniture the exact space required for skirting boards - for example, if the lowest board of your furniture is on the floor.

5 EUR

per board

Recesses for heaters, sockets, fireplaces, passages, wall projections etc. in the horizontal and / or vertical we can exactly according to your ideas and specifications.

30 EUR

per design

If you prefer clear, uniform shapes, we will align your furniture exactly symmetrically along the axis.

35 EUR

per design

We can round off protrusions of shortened horizontal and/or vertical parts of your furniture.

17,50 EUR

per overhang

Any part of your furniture can have the protrusions of vertical and horizontal lines removed, should they bother you or you don't like them, for example internal projections of a TV recess. The outer flanks can also be finished smooth, either partially or completely without protrusions.
The protrusions are primarily used to implement the plug-in system. When removing, visible connectors are planned if necessary.

35 EUR

per design

We change the vertical spacing and thus the width of shelves for you, for example to ensure access to sockets. An adjustment of the compartment size can also be useful, to match the horizontal of several pieces of furniture.

25 EUR

per connected horizontal
+ 120 EUR (instead of 45 EUR)

With a perfectly fitting corner furniture you want to set a highlight in your room or use the available space optimally? This is easily possible - with two or more shelf units, which are joined together with connectors. We can create up to three designs per corner piece of furniture with a uniform shape and adjusted shelf heights.

On request

individual

To create spectacular special designs such as shelf-table combinations, individual furniture trees, galleries, furniture in oversizes etc. we are always happy to take care of your enquiry.